10 Gigabit Performance for Critical Connections These fiber cords are OM3 rated for the extreme demands of SAN networks. The OFNP (plenum) rating conforms to strict NEC building safety codes but is compatible with unrated or OFNR (riser) rated applications. They are precision factory tested for insertion and return loss to ensure transmission performance per TIA-568-C.3 specifications. The combination of LC connectors in a protective yoke, strain relief boots and zirconia ceramic ferrules provides a dependable, low-loss performance. Bend Insensitive Engineering Bend insensitive multimode fiber (BIMMF) provides greater flexibility in tight spaces or long cable runs with multiple bends. BIMMF fiber cable is engineered with an extra layer of glass around the core to ensure optical perf
15 Meter OS2 LC SC Singlemode Fiber Patch Cable | 10Gb Duplex 9/125 LC to SC Jumper Cords.Assembled with duplex, 1.25mm small form factor (sff), ceramic ferrule LC connectors and 2.5mm ceramic ferrule SC connectors. Duplex LC and SC clips come pre-installed for easy installation and management in high density cable environments. Connectors have a maximum connector loss of 0.50dB with a typical connector loss of 0.30dB and typical return loss of -55dB.Engineered for fast and reliable singlemode connectivity between switches, transceivers, media converters, patch panels, sm sfp, and other single-mode equipment and applications. This SMF cable utilizes the highest quality Corning 9/125 micron fiber core/cladding. Wrapped in a durable, yellow, 2.0mm outer diameter, OFNR (riser rated), PVC
Easy installation Beyondtech OS1 LC to LC Fiber Patch cable simplify the installation process and reduce the total cost of ownership of your project, due to pre-terminated fiber intrinsic plug-and-play characteristic. 10 Gigabit Performance OS1 Singlemode laser optimized fiber patch cords are designed to be used in LAN, WAN and SAN 10GB networks and is able of handling the most challenging telecommunications data transmission requests. Properly tested Each patch cord is individually and rigorously tested and certified to be within accurate optical insertion loss. Cable Specifications Wavelengths: 1310 and 1550nm Yellow Jacket Bend Radius - Minimum / 5cm Cable Jacket (3.00mm) Operating Temperature / -4º to 158º F (-20º to +70º C) Single mode 9/125um Standard Zip Cord OS1 fibe
Tripp Lite 15-meter ( 50ft ) multimode duplex fiber optic ST/LC patch cable is manufactured from 62.5/125 zipcord fiber. The cable has LC to ST connectors, a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in LAN applications. Tripp Lite warrants this product to be free from defects in materials and workmanship for life.
15 Meter OS2 LC LC Fiber Patch Cable | 10Gb Duplex 9/125 LC to LC Singlemode Jumper Cords.Assembled with duplex, small form factor, 1.25mm ceramic ferrule, LC connectors designed for compact, high cable density environments. Connectors include pre-installed duplex LC clips and have a maximum connector loss of 0.50dB with a typical connector loss of 0.30dB and typical return loss of -55dB. This SMF 10Gb fiber cable utilizes Corning 9um core / 125um cladding and is wrapped in a durable, yellow, 2.0mm outer diameter, OFNR (riser rated), PVC jacket that is UV resistant, water resistant, fire retardant, and immune to electrical interference. Engineered for reliable, long-distance, Gigabit Ethernet connectivity between buildings, switches, servers, work stations, sfp+ transceivers, media co
15 Meter OM3 LC LC Fiber Patch Cable | 10Gb Duplex 50/125 Multimode Jumper Cord. Accelerate your network's performance to the edge of technology with this Corning 50/125um core/cladding, OM2 backwards compatible, laser optimized multimode fiber cable and extend your 10Gbps reach up to 300 meters. Assembled with ofnr riser rated, 2.0mm outer diameter, zip-cord reinforced, aqua pvc jacket that's flame retardant, water resistant, UV resistant and immune to electrical interference. Terminated with small form factor, 1.25mm ceramic ferrule LC type connectors and includes pre-installed, lc duplex clips for quick installation and management in high density cable environments. Engineered for fast and reliable connectivity between switches, transceivers, media converters, patch panels and othe
Tripp Lite introduces it's new OM3 Laser-Optimized Multimode Fiber (LOMMF) "Aqua" cables, for use with 10Gb Ethernet applications. These new technology, 50/125um, SC/LC Fiber Optic cables, provide nearly three times the bandwidth over conventional 62.5um multimode fiber, with performance rivaling that of Single mode cable, at a much reduced cost. LOMMF cable allows 10Gb serial transmission over extended distances in the 850nm wavelength window, where low-cost Vertical Cavity Surface Emitting Lasers (VCSELs) enable a cost-effective, high-bandwidth solution. LOMMF is ideally suited for LAN's, SAN's, and high-speed parallel interconnects for head-ends, central offices, and data centers. Tripp Lite warrants this product to be free from defects in material and workmanship for Life.
100 Gigabit Performance The Cable Matters Multimode OM4 Duplex 50/125 micron fiber patch cords are rated for the extreme demands of 10 Gigabit Ethernet, 8 Gigabit Fibre Channel, and 40 Gigabit InfiniBand networks. OM4 rated fiber patch cable extends the maximum reach distance from 300m to 550m and more than doubles the available bandwidth. Bend Insensitive Engineering with Backwards Compatibility Bend insensitive multimode fiber (BIMMF) provides greater flexibility in tight spaces or long cable runs with multiple bends. BIMMF fiber cable is engineered with an extra layer of glass around the core to ensure optical performance and provide durability for the extreme requirements of SAN network or high density patch panel installations. It offers interoperability and backwards compatibil
Easy installation Beyondtech OM2 LC to LC Fiber Patch cable simplify the installation process and reduce the total cost of ownership of your project, due to pre-terminated fiber intrinsic plug-and-play characteristic. EMI immunity OM2 Multimode fiber is immune to many environmental factors, such as Electromagnetic Interference and Radio-Frequency interference, so it is possible to run patch cords next to industrial equipment without any problem. Properly tested Each patch cord is individually and rigorously tested and certified to be within accurate optical insertion loss. Cable Specifications Wavelengths: 850 and 1300nm Orange Jacket Bend Radius - Minimum / 5cm Cable Jacket (3.00mm) Operating Temperature / -4° to 158° F (-20° to +70° C) Multimode 50/125um Standard Zip Cord
Tripp Lite's 50-feet multimode duplex fiber optic ST/ST patch cable is manufactured from 62.5/125 zipcord fiber. The cable has ST connectors on each end, a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in LAN applications.
© Shoplology.com - price comparison shopping - all rights reserved - Sitemap Shoplology.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com