TOP 10 Rustler Rear deals

  • RPM Rear Shock Tower Slash, Rustler, Stampede, Bandit, Black

    RPM rear shock towers for the electric versions of the Stampede, Rustler & Bandit as well as the Slash were designed with one thing in mind – rugged durability. Once again, we've exceeded our own expectations with this shock tower. While we've maintained all stock geometry on these shock towers, we've beefed them up in all the right places to eliminate annoying rear shock tower breakage. Our ver [read more]

    • Color: Black
    • Brand: RPM
    • ASIN: B000WKV1RY
    • UPC: 885795641054

  • RPM 80185 Rear A-Arms Blue E- Monster Jam, Rustler, Stampede

    OverviewRPM rear A-arms for the Traxxas Slash are designed specifically for the Slash - they are not multi-platform A-arms like the stock versions.Our first design challenge was to beef up our version of the Slash rear A-arms to handle some serious abuse. The material around the inner and outer hinge pins has been increased by a whopping 64%! We then eliminated all of the unnecessary holes and sho [read more]

    • Brand: RPM
    • ASIN: B000KKDMFU
    • UPC: 885669861274

  • RPM 80182 Rear A-Arms Black E-Monster Jam, Rustler, Stampede Black

    RPM Rear A-Arms (2), Black: RU, ST, RPM80182

    • Color: black
    • Brand: RPM
    • ASIN: B000KKBT1O
    • UPC: 885729048836

  • RPM Rear Bearing Carrier 2WD Slash, Rustler, Stampede, and Bandit, Black

    Up to this point, electric Rustler, Stampede, Slash 2wd & Bandit owners have relied on bushings or undersized, weak bearings to handle the punishing chores of supporting the wheels. RPM's new front and rear bearing carriers allow Rustler, Stampede, Slash & Bandit owners to install massive 5mm x 11mm bearings (not included) that will not only improve performance, but will increase the time interval [read more]

    • Color: Black
    • Brand: RPM
    • ASIN: B0006O7QP2
    • UPC: 672415803820

  • Traxxas Camber Links Turnbuckle/Rod Ends Front/Rear Stampede Rustler 3643 3644

    This would be a great way to upgrade your weak Stampede, Rustler, or Slash 4x4 Links. Traxxas part numbers 3643 & 3644. Pulled from a brand new Traxxas VXL Model.

    • Brand: Traxxas
    • ASIN: B01LW9F2ZB
    • UPC: 746591982645

  • ST Racing Aluminum Rear Arms for Traxxas Stampede, Rustler and Monster Jam

    CNC Machined from high grade aluminum material, these aluminum Rear A-arms will bullet proof your Traxxas Stampede and Rustler. For smooth suspension operation, the hinge-pin holes are fitted with machined delrin inserts. Each set of A-arms also comes with high-grade steel hinge-pin set w/e-clips. Solid in design and construction. (1 pair) Note: not compatible with Traxxas Slash as the Slash uses [read more]

    • Color: Blue
    • Brand: ST Racing Concepts
    • ASIN: B006QQ71HM
    • UPC: 610563341399

  • RPM Rear Bumper or Wheelie Bar Mount Electric 2WD Slash, Rustler, Stampede, and Bandit, Black

    After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, we found several issues that could use the RPM touch. Those same problems were encountered on e-Rustler, e-Stampede & Bandit vehicles using the stock wheelie bar mount. The problem – the stock mount uses only a single screw on the gear cover side to hold the mount in place. That causes a hinge effect under r [read more]

    • Color: Black
    • Brand: RPM
    • ASIN: B001PJNNQI
    • UPC: 885675673397

  • Traxxas 3752 Stub Axle Carriers (pair)

    Traxxas 3752 rear stub axle carriers are a direct OEM replacement for Electric Traxxas Rustler, 2WD Stampede and Stampede-Based vehicles, and 2WD Slash and Slash-based vehicles. Each axle carrier requires two 5x11x4mm bearings or bushings (not included) Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials [read more]

    • Brand: Traxxas
    • ASIN: B000SU2D0C
    • UPC: 020334375209

  • Atomik RC Alloy Rear Lower Arm, Red fits the Traxxas 1/10 Slash 4X4 and Other Traxxas Models - Replaces Traxxas Part 3655X

    Give your Traxxas 1/10 Slash 4X4 the gift of alloy greatness with this Alloy Rear Lower Arm, Red. Atomik RC has a full line of aluminum hop up parts for your Traxxas 1/10 Slash 4X4, available now in blue, red, and grey/gunmetal.Replaces Traxxas Part No. 3655X. Precision CNC Machined Hop Up Part for Factory Spec Fitment. Made from Hardened Billet 6061 Aluminum for Lightweight and Durable Performanc [read more]

    • Color: Red
    • Brand: Atomik RC
    • ASIN: B00439K1WG
    • UPC: 845623056269

  • Traxxas 3652X Red-Anodized 6061-T6 Aluminum Rear Stub Axle Carriers (pair)

    Traxxas 3652X aluminum stub axle carriers add both strength and beauty. In addition to the durability and precision of the machined billet 6061-T6 aluminum, larger 5x11mm ball bearings are included for smooth performance, reduced friction, and long life. Rubber seals on the bearings make them virtually maintenance free. Easy, bolt-on good looks in red, blue, green or pink anodizing. Stub axle carr [read more]

    • Color: Red
    • Brand: Traxxas
    • ASIN: B000LTY3QW
    • UPC: 020334365293